Power Supply Bare Boards and Kits

    In Stock.

DANGER!
Please Note
This board requires that you wire
HIGH VOLTAGE!
circuits.
If you do not know how to do
this please get the
assistance of someone competent
in wiring high voltage circuits before attempting to
build this project.

 
Pricing
Part Number
Description
Quantity 1-4
Quantity 5-9
100-1006
 Power Supply Board with Solder Mask and Legend, No Parts
$15.00
$14.25
100-1006-1
 Parts for +/- 15 volt supply includes:
2-Heatsinks
1-LM7815
1-LM7915
2-4700uF 35V Capacitors
8-1n4003
2-10uF 35 volt capacitors
2-4 pin molex headers
2-4 pin molex housing
10-pins for molex housing (two spares)
2 TO-3 Sil pads (I hate yucky grease)
6-32 hardware
(this does not include the PC board)
$12.00
$12.00
100-1006-2
 Parts for +5 volt supply includes:
1-Heatsink
1-LM7805
1-10000uF 16V Capacitor
1-10uF 35V Capacitor
4-1n4003
2-4 pin molex headers
2-4 pin molex housings
10-pins for molex housing (two spares)
1 TO-3 Sil Pad (I hate yucky grease)
6-32 hardware
(this does not include the PC board)
$6.60
$6.60

    There are so many ways you can put this thing together, that for the time being, I will not be offering any parts for this one.  You will need to get a transformer or two, depending on how you build it, regulators, heat sinks, filter capacitors, rectifiers, connectors.

    Please Note....The parts packages does not include a transformer.  You can get the transformers cheaper by getting the direct from the distributor.  I recomend these:
    Digikey Part Number TE62060    $13.32    2x7 VAC 25VA Transformer.  Use for +5 volt power supply
    Digikey Part Number TE62073    $14.85    2x15 VAC 35VA Transformer.  Use for +/-15 volt supplies
    Digikey Part Number TE62072    $14.85    2x12 VAC 35VA Transformer.  Use for +/- 12 volt supplies
 

    Home